Full Product Name
SMN1 Polyclonal Antibody
Product Synonym Names
SMA; SMN; SMA1; SMA2; SMA3; SMA4; SMA; SMNT; BCD541; GEMIN1; TDRD16A; T-BCD541
Product Gene Name
anti-SMN1 antibody
[Similar Products]
Research Use Only
For Research Use Only. Not for use in diagnostic procedures.
Species Reactivity
Human, Mouse, Rat
Purity/Purification
Antigen affinity purification
Concentration
1.2mg/mL (lot specific)
Immunogen
Synthetic peptide of human SMN1
Calculated Molecular Weight: 32kDa
Buffer
PBS with 0.05% sodium azide, 50% glycerol, pH7.3
Preparation and Storage
Store at -20 degree C (regular) and -80 degree C (long term). Avoid freeze / thaw cycles.
ISO Certification
Manufactured in an ISO 9001:2015 Certified Laboratory.
Other Notes
Small volumes of anti-SMN1 antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Related Product Information for
anti-SMN1 antibody
This gene is part of a 500 kb inverted duplication on chromosome 5q13. This duplicated region contains at least four genes and repetitive elements which make it prone to rearrangements and deletions. The repetitiveness and complexity of the sequence have also caused difficulty in determining the organization of this genomic region. The telomeric and centromeric copies of this gene are nearly identical and encode the same protein.
Applications Tested/Suitable for anti-SMN1 antibody
ELISA (EIA), Western Blot (WB)
Application Notes for anti-SMN1 antibody
WB: 1:200-1:1000
Western Blot (WB) of anti-SMN1 antibody
Western Blot analysis of Hepg2, hela and 293T cell using SMN1 Polyclonal Antibody at dilution of 1:200

NCBI/Uniprot data below describe general gene information for SMN1. It may not necessarily be applicable to this product.
NCBI Accession #
NP_001284644.1
[Other Products]
NCBI GenBank Nucleotide #
NM_001297715.1
[Other Products]
UniProt Secondary Accession #
Q13119; Q549U5; Q96J51; A8K0V4[Other Products]
UniProt Related Accession #
Q16637[Other Products]
Molecular Weight
27,135 Da
NCBI Official Full Name
survival motor neuron protein isoform a
NCBI Official Synonym Full Names
survival of motor neuron 1, telomeric
NCBI Official Symbol
SMN1 [Similar Products]
NCBI Official Synonym Symbols
SMA; SMN; SMA1; SMA2; SMA3; SMA4; SMA@; SMNT; BCD541; GEMIN1; TDRD16A; T-BCD541
[Similar Products]
NCBI Protein Information
survival motor neuron protein; component of gems 1; gemin-1; survival motor neuron 1 protein; tudor domain containing 16A
UniProt Protein Name
Survival motor neuron protein
UniProt Synonym Protein Names
Component of gems 1; Gemin-1
Protein Family
Survival motor neuron protein
UniProt Gene Name
SMN1 [Similar Products]
UniProt Synonym Gene Names
SMN; SMNT [Similar Products]
UniProt Entry Name
SMN_HUMAN
NCBI Summary for SMN1
This gene is part of a 500 kb inverted duplication on chromosome 5q13. This duplicated region contains at least four genes and repetitive elements which make it prone to rearrangements and deletions. The repetitiveness and complexity of the sequence have also caused difficulty in determining the organization of this genomic region. The telomeric and centromeric copies of this gene are nearly identical and encode the same protein. However, mutations in this gene, the telomeric copy, are associated with spinal muscular atrophy; mutations in the centromeric copy do not lead to disease. The centromeric copy may be a modifier of disease caused by mutation in the telomeric copy. The critical sequence difference between the two genes is a single nucleotide in exon 7, which is thought to be an exon splice enhancer. Note that the nine exons of both the telomeric and centromeric copies are designated historically as exon 1, 2a, 2b, and 3-8. It is thought that gene conversion events may involve the two genes, leading to varying copy numbers of each gene. The protein encoded by this gene localizes to both the cytoplasm and the nucleus. Within the nucleus, the protein localizes to subnuclear bodies called gems which are found near coiled bodies containing high concentrations of small ribonucleoproteins (snRNPs). This protein forms heteromeric complexes with proteins such as SIP1 and GEMIN4, and also interacts with several proteins known to be involved in the biogenesis of snRNPs, such as hnRNP U protein and the small nucleolar RNA binding protein. Multiple transcript variants encoding distinct isoforms have been described. [provided by RefSeq, Jul 2014]
UniProt Comments for SMN1
SMN: The SMN complex plays an essential role in spliceosomal snRNP assembly in the cytoplasm and is required for pre-mRNA splicing in the nucleus. It may also play a role in the metabolism of snoRNPs. Defects in SMN1 are the cause of spinal muscular atrophy autosomal recessive type 1 (SMA1). Spinal muscular atrophy refers to a group of neuromuscular disorders characterized by degeneration of the anterior horn cells of the spinal cord, leading to symmetrical muscle weakness and atrophy. Autosomal recessive forms are classified according to the age of onset, the maximum muscular activity achieved, and survivorship. The severity of the disease is mainly determined by the copy number of SMN2, a copy gene which predominantly produces exon 7-skipped transcripts and only low amount of full-length transcripts that encode for a protein identical to SMN1. Only about 4% of SMA patients bear one SMN1 copy with an intragenic mutation. SMA1 is a severe form, with onset before 6 months of age. SMA1 patients never achieve the ability to sit. Defects in SMN1 are the cause of spinal muscular atrophy autosomal recessive type 2 (SMA2). SMA2 is an autosomal recessive spinal muscular atrophy of intermediate severity, with onset between 6 and 18 months. Patients do not reach the motor milestone of standing, and survive into *****hood. Defects in SMN1 are the cause of spinal muscular atrophy autosomal recessive type 3 (SMA3). SMA3 is an autosomal recessive spinal muscular atrophy with onset after 18 months. SMA3 patients develop ability to stand and walk and survive into *****hood. Defects in SMN1 are the cause of spinal muscular atrophy autosomal recessive type 4 (SMA4). SMA4 is an autosomal recessive spinal muscular atrophy characterized by symmetric proximal muscle weakness with onset in *****hood and slow disease progression. SMA4 patients can stand and walk. Belongs to the SMN family. 4 isoforms of the human protein are produced by alternative splicing.
Protein type: RNA processing; RNA-binding
Chromosomal Location of Human Ortholog: 5q13.2
Cellular Component: nucleoplasm; Cajal body; spliceosome; cytoplasm; SMN complex; nucleus; Z disc; cytosol
Molecular Function: identical protein binding; protein binding; RNA binding
Biological Process: nervous system development; spliceosomal snRNP biogenesis; spliceosome assembly; gene expression
Disease: Spinal Muscular Atrophy, Type Ii; Spinal Muscular Atrophy, Type Iv; Spinal Muscular Atrophy, Type Iii; Spinal Muscular Atrophy, Type I
Research Articles on SMN1
1. Results suggest a specific point mutation spectrum in the Polish spinal muscular atrophy population; in patients with preserved one SMN1 allele without common exon 7 deletion, a special consideration should be given to the p.Thr274Ile mutation
Precautions
All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.
Disclaimer
While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.
It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.