Product Name
Antithrombin (AT), Recombinant Protein
Full Product Name
Recombinant Antithrombin (AT)
Product Synonym Names
AT3; ATIII; SERPINC1; Anti-Thrombin Antibodies; Serpin Peptidase Inhibitor Clade C Member 1; Coding Sequence Signal Peptide Antithrombin Part 1
Product Gene Name
AT recombinant protein
[Similar Products]
Matching Pairs
Unconjugated
Antibody: Antithrombin (MBS2032328)
Immunogen: Antithrombin (MBS2033241)
Matching Pairs
APC-CY7 Conjugated Antibody: Antithrombin (AT) (MBS2064842)
Immunogen: Antithrombin (MBS2033241)
Matching Pairs
PE Conjugated Antibody: Antithrombin (AT) (MBS2064844)
Immunogen: Antithrombin (MBS2033241)
Matching Pairs
APC Conjugated Antibody: Antithrombin (AT) (MBS2064846)
Immunogen: Antithrombin (MBS2033241)
Matching Pairs
Cy3 Conjugated Antibody: Antithrombin (AT) (MBS2064848)
Immunogen: Antithrombin (MBS2033241)
Matching Pairs
FITC Conjugated Antibody: Antithrombin (AT) (MBS2064850)
Immunogen: Antithrombin (MBS2033241)
Matching Pairs
HRP Conjugated Antibody: Antithrombin (AT) (MBS2064852)
Immunogen: Antithrombin (MBS2033241)
Matching Pairs
Biotin Conjugated Antibody: Antithrombin (AT) (MBS2094397)
Immunogen: Antithrombin (MBS2033241)
Research Use Only
For Research Use Only. Not for use in diagnostic procedures.
Sequence
HGNPVDDI CIAKPRDIPV NPMCIYRSPA KKATEEDVLE QKVPEATNRR VWELSKANSR FATNFYQHLA DSKNDNDNIF LSPLSISTAF AMTKLGACNN TLKQLMEVFK FDTISEKTSD QIHFFFAKLN CRLYRKANKS SNLVSANRLF GDKSLTFNES YQDVSEIVYG AKLQPLDFKE NPEQSRVTIN NWVANKTEGR IKDVIPQGAI DELTALVLVN TIYFKGLWKS KFSPENTRKE PFHKVDGQSC LVPMMYQEGK FKYRRVGEGT QVLEMPFKGD DITMVLILPK PEKSLAKVEQ ELTPELLQEW LDELSEVMLV VHVPRFRIED SFSLKEQLQD MGLVDLFSPE KSQLPGIIAE GRDDLFVSDA FHKAFLEVNE EGSEAAASTS VVITGRSLNP SRVTFKANRP FLVLIREVAL NTIIFMGRVS NPCVN
3D Structure
ModBase 3D Structure for P01008
Purity/Purification
> 95%
Form/Format
Supplied as lyophilized form in 20mM Tris, 150mM NaCl, pH8.0, containing 1mM EDTA, 1mM DTT, 0.01% sarcosyl, 5% trehalose, and preservative.
Predicted Molecular Mass
52.6kDa
Usage
Reconstitute in sterile PBS, pH7.2-pH7.4.
Endotoxin Level
<1.0EU per 1 ug (determined by the LAL method)
Expression System
Prokaryotic expression
Tag
two N-terminal Tags, His-tag and T7-tag
Preparation and Storage
Avoid repeated freeze/thaw cycles. Store at 2-8 degree C for one month. Aliquot and store at -80 degree C for 12 months.
Stability Test: The thermal stability is described by the loss rate of the target protein. The loss rate was determined by accelerated thermal degradation test, that is, incubate the protein at 37 degree C for 48h, and no obvious degradation and precipitation were observed. (Referring from China Biological Products Standard, which was calculated by the Arrhenius equation.) The loss of this protein is lessthan 5% within the expiration date under appropriate storage condition.
ISO Certification
Manufactured in an ISO 9001:2008 and ISO 13485:2003 Certified Laboratory.
Supply Chain Verification
Manufactured in a lab with traceable raw materials. Bulk orders can typically be prepared to the customerâs specifications, please inquire.
Other Notes
Small volumes of AT recombinant protein vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Applications Tested/Suitable for AT recombinant protein
SDS-PAGE, Western (WB), ELISA (EIA), Immunoprecipitation (IP).
SDS-Page of AT recombinant protein
NCBI/Uniprot data below describe general gene information for AT. It may not necessarily be applicable to this product.
NCBI Accession #
CAA48690.1
[Other Products]
UniProt Primary Accession #
P01008
[Other Products]
UniProt Secondary Accession #
P78439; P78447; Q13815; Q5TC78; Q7KZ43; Q7KZ97; Q9UC78; B2R6P0[Other Products]
UniProt Related Accession #
P01008[Other Products]
Molecular Weight
52,602 Da
NCBI Official Full Name
antithrombin
NCBI Official Synonym Full Names
serpin peptidase inhibitor, clade C (antithrombin), member 1
NCBI Official Symbol
SERPINC1 [Similar Products]
NCBI Official Synonym Symbols
AT3; AT3D; ATIII; THPH7
[Similar Products]
NCBI Protein Information
antithrombin-III
UniProt Protein Name
Antithrombin-III
UniProt Synonym Protein Names
Serpin C1
Protein Family
Antithrombin
UniProt Gene Name
SERPINC1 [Similar Products]
UniProt Synonym Gene Names
AT3; ATIII [Similar Products]
UniProt Entry Name
ANT3_HUMAN
NCBI Summary for AT
The protein encoded by this gene is a plasma protease inhibitor and a member of the serpin superfamily. This protein inhibits thrombin as well as other activated serine proteases of the coagulation system, and it regulates the blood coagulation cascade. The protein includes two functional domains: the heparin binding-domain at the N-terminus of the mature protein, and the reactive site domain at the C-terminus. The inhibitory activity is enhanced by the presence of heparin. More than 120 mutations have been identified for this gene, many of which are known to cause antithrombin-III deficiency. [provided by RefSeq, Jul 2009]
UniProt Comments for AT
Most important serine protease inhibitor in plasma that regulates the blood coagulation cascade. AT-III inhibits thrombin, matriptase-3/TMPRSS7, as well as factors IXa, Xa and XIa. Its inhibitory activity is greatly enhanced in the presence of heparin.
Research Articles on AT
1. report of a large in-frame deletion causing antithrombin deficiency
Precautions
All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.
Disclaimer
While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.
It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.